Virgin engineers are a leading firm in the international market for producing, exporting and stocking the whole range of condensate pots. We cater to fulfill each requirement of the customers regarding industrial condensate pots. Here we stock the most used Monel 400 Condensate Pots in various standards, designations, specifications, and standards.
Monel 400 Condensate Pots are designed to drain out foreign material from the pipeline while protecting critical components of any instrumentation system. Mainly, steam is passed through the condensate pots. These are also known as condensate chambers, condensing pots or seal pots. Its connection assures the isolation of foreign materials. The condensate debris is drained from the bottom valve connection. Customers can purchase either vertical or horizontal lines depending on the system requirements. These condensate pots are used before the pressure transmitters’ line due to the high temperature of steam. This higher temperature steam may directly damage the diaphragm of the pressure transmitter so customers can use steam condensate pots.
Resistance ability of the grades:
These pots are manufactured using the high temperature, heat resistance and tested raw materials that contribute to wide usage in the engineering applications. These pots possess exceptional properties such as erosion-corrosion resistance, high abrasion resistance, and durability. It is a single phase solid solution condensate pots have elevated resistance to corrosive media over a different range of temperatures from sub-zero temperatures to 800 deg F. These condensate pots are widely used in many applications especially in the marine and chemical processing industries.
These condensate pots possess resistance to corrosion under many reducing agents. Moreover, it is one of the important grades that can be used in the concentric organic and inorganic compounds. This grade has brilliant resistance in a higher concentration of boiling points. Mainly, these pots are designed in the application in the salt waters. These are manufactured using the standard machining process such as forming, machining, shaping and joining operations. The hot working operation performed in temperature between 1200 deg F to 2150 deg F. the cold working operation is performed in annealed conditions.
Quality standards:
We are an ISO certified company that always strives to remain a leader in the industry by continually improving its products and services. Our quality assurance program is evident from the growing satisfied customer base. We share the benefits of ISO accreditations with our customers and take pride in our commitment to complete customer satisfaction. Being an approved and reputed company we have well-defined quality control measures to meet the international standards of quality. Our core objective is complete client satisfaction, thus, we are continually improving upon the quality of products.
Our aim is to set the highest standards of customer satisfaction, manufacturing, product development through stringent quality tests. The manufactured products are tested in accordance with internationally approved standards through stringent tests. Destructive test, leakage test, mechanical property test, compression test, hardness test, PMI test, tensile test, micro test, and macro tests are performed by us. Other tests add in our testing section are flattening test, ultrasonic test, hydro testing, chemical composition analysis, radiography, pitting corrosion test, IGC test, and more.
2", 3", 4", 6" & Larger size
NPT
40, 80, 160, XXS Seamless Steel
8”, 10” & 12" & Larger size
6000 PSIG(41.34 MPa)
NPT as per ANSI B1.20.1,Socket weld as per ANSI B16.11, Butt weld as per ANSI B16.9
STANDARD | UNS | WNR. | JIS | BS | GOST | AFNOR | EN |
Monel 400 | N04400 | 2.4360 | NW 4400 | NA 13 | МНЖМц 28-2,5-1,5 | NU-30M | NiCu30Fe |
Grade | C | Mn | Si | S | Cu | Fe | Ni |
Monel 400 | 0.30 max | 2.00 max | 0.50 max | 0.024 max | 28.00 – 34.00 | 2.50 max | 63.00 min |
Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
8.8 g/cm3 | 1350 °C (2460 °F) | Psi – 80,000, MPa – 550 | Psi – 35,000, MPa – 240 | 40 % |
Monel N04400 Condensate Pots are manufactured and controlled to international standards such as ASTM, ASME, BS, MSS, EN, DIN or WERKSTOFF. Our products undergo stringent quality tests before they are dispatched.
The material tests performed on Monel® 400 Condensate Pots are PMI Testing, Ultrasonic Test, Mechanical Testing, Spectro Tests for Chemical Analysis of the grade, Flaring Test, IGC, etc. are some of the tests conducted at our facility. We welcome stage wise inspection from any of your representative or third party inspection agencies.
monel 400 condensate pots condensing chamber, monel 400 condensate pots, monel 400 seal pots, monel 400 condensate pots manufacturer in mumbai, monel 400 condensate pots, monel 400 condensate pot 3 ports type 1 size, parker condensate pots monel 400, monel 400 condensate pots, monel 400 instrumentation condensate pots, monel 400 alloy condensate seal pots traders, monel 400 condensate pot 4 ports type 1, monel 400 condensate drip pots, buy high quality monel 400 condensate pots, monel 400 condensate pots cp1 series, monel 400 condensate pots types, monel 400 condensate pot 3 ports type 2 dealers, monel 400 air header, monel 400 condensate pot 3 ports type 3 india, monel 400 condensate pots price, monel alloy 400 condensate pots size, monel® 400 condensate pot 4 ports type 1, garde alloy 400 monel swagelok condensate pots, instrument condensate pots monel grade 400, monel 400 alloy uns n04400 condensate pots stockholder, monel 400 condensate drain pots, monel 400 condensate pots standards, monel 400 condensate pot 6 ports distributors, monel 400 seal chambers, monel® 400 seal pots stockists, monel 400 condensate pots 2 ports.
© Copyright | Virgin Engineers 2021. All Right Reserved.