Virgin Engineers are no doubt today leading on the top for being the best manufacturer, stockiest, supplier and exporter of Stainless steel 310 / 310S Condensate Pots. We are offering a high quality of product to the buyers and also providing the full range of the pot. The pots are used for catching and holding the condensate. It helps in keeping the manifold orifice clean and free from foreign materials. They at the instrument upstream are located and are having a bottom drain so that they can be cleaned.
The pots are made available to the buyers in different material ranges. The installation of the unit can be done in horizontally or vertically in between gauge/transmitter and flow meter acting as a barrier for lining fluid permitting flow condition direct sensing. These pots are today used in many industrial applications due to many good properties it possesses. Seal pots that we call it as condensate pots are used for allowing the liquid to seal in between the flowing gas and instrument.
We as a customer oriented is offering the product to the buyer at different specifications that vary in sizes, standards, surface finishes, color, etc. Also to the buyers we are offering the product at customized specifications. To the buyers, the delivering of the ordered product ranges is done well on time in proper condition as per the expectations of buyers in terms of quality.
Alloy 310 is stainless steel that is austenitic in nature is developed for use at the applications demanding for the high-temperature corrosion resistance. This alloy is resisting oxidation under the mildly cyclic condition to 2010 Deg F. Due to high chromium and average nickel content, this alloy is resisting sulfidation and can be used at the averagely carburizing atmospheres. The high severe carburizing atmosphere of the equipment of the thermal process usually needs nickel like 330.
Alloy 310 is used at little bit nitriding, cementing, oxidizing and at the thermal cyclic condition. Also, this alloy has found usability at cryogenic applications with the less magnetic permeability as well as toughness down to the temperature ranging -450 Deg F. When this alloy is heated, it becomes subjective to sigma phase precipitations. Alloy 310S is the alloy low carbon version and is used due to fabrication ease.
Quality assurance of the product-
The testing and inspection for quality check are conducted to only check product quality and supply the high quality of product to the buyers. At every stage of the production process, the quality check is done by the third party inspection agency based on a few set parameters so no poor quality of product delivering is done. Few tests conducted is like positive material identification test, hardness test, chemical test, intergranular corrosion test, mechanical test, visual inspection, etc.
In order to deliver the Stainless steel 310 / 310S Condensate Pots without causing any harm, the packaging is done into environmental poly bags and in plywood cases and carton boxes.
2", 3", 4", 6" & Larger size
40, 80, 160, XXS Seamless Steel
8”, 10” & 12" & Larger size
6000 PSIG(41.34 MPa)
NPT as per ANSI B1.20.1,Socket weld as per ANSI B16.11, Butt weld as per ANSI B16.9
|SS 310S||1.4845||S31008||SUS 310S||310S16||20Ch23N18||-||X8CrNi25-21|
|SS 310||0.015 max||2.0 max||0.15 max||0.020 max||0.015 max||24.00 - 26.00||0.10 max||8 – 10.5||54.7 min|
|SS 310S||0.08 max||2.0 max||1.00 max||0.045 max||0.030 max||24.00 - 26.00||0.75 max||19.00 - 21.00||53.095 min|
|Density||Melting Point||Tensile Strength||Yield Strength (0.2%Offset)||Elongation|
|7.9 g/cm3||1402 °C (2555 °F)||Psi – 75000 , MPa – 515||Psi – 30000 , MPa – 205||40 %|
Stainless Steel S31000, S31008 Condensate Pots are manufactured and controlled to international standards such as ASTM, ASME, BS, MSS, EN, DIN or WERKSTOFF. Our products undergo stringent quality tests before they are dispatched.
The material tests performed on Stainless Steel 310 / 310S Condensate Pots are PMI Testing, Ultrasonic Test, Mechanical Testing, Spectro Tests for Chemical Analysis of the grade, Flaring Test, IGC, etc. are some of the tests conducted at our facility. We welcome stage wise inspection from any of your representative or third party inspection agencies.
stainless steel 310 seal chambers, ss 310 swagelok condensate pots, stainless steel 310 condensate pots types, ss 310 condensing pots stockholder, ss 310 condensate pots 2 ports, 310 stainless steel condensate pot application, stainless steel 310 condensate pot 4 ports type 1 manufacturer in mumbai, ss 310 condensate pot 3 ports type 3 india, 310s stainless steel seal pots, ss 310s fabricated condensate pots size, ss 310 condensate seal pots traders, ss 310 parker condensate pots, ss 310s condensate pots cp1 series, stainless steel 310s condensate pot 6 ports distributors, stainless steel 310s condensate pot 4 ports type 1, ss 310 condensate pots price, ss 310 condensate pot 3 ports type 1 size, ss 310 seal pots stockists, buy high quality stainless steel 310 / 310s condensate pots, ss 310s condensing chamber, stainless steel 310 condensate pots standards, stainless steel 310s condensate pot 3 ports type 2 dealers, ss 310s air header, parker stainless steel condensate pots grade 310 / 310s.
© Copyright | Virgin Engineers 2019. All Right Reserved.