SS 316H Needle & Gauge Valves

SS 316H Gauge Bleed Needle Valves Suppliers, SS 316H Needle and Gauge Valves, Stainless Steel 316H Needle / Gauge Valves, SS Gr.316H Industrial Needle & Gauge Valve, Grade 316H Stainless Steel Gauge Valves, SS 316H Needle & Gauge Valves Manufacturers in Mumbai, India.

Our team at Virgin engineers joined decades of experience as research to build up a line of products that are insightful creative and offer most outrageous utility. We have supplied, and traded Stainless Steel 316H Needle & Gauge Valves to our domestic and international customers. We produce different types of valves under the norms of international standards, customers can avail them in various standards, designations, specifications, and non-standard dimensions.

Stainless Steel 316H Needle & Gauge Valves description:
Needle & Gauge Valves are fittings developed with a tapered and slender point at the end of its valve stem. The valve stems which is actually lowered right via the seat to restrict and start the flow. These valves are used to ensure that the fluid passes via the valve and actually turns 90 deg before it passes through an orifice which serves as the seat.

The seat of valves comes with a rod having a cone shaped tip. These valves are actually used to regulate the flow gases and liquids which are set at low flow. It has the fine threading design of the needle valve stem; along with due to its large seat area ensure that precise resistance will follow. SS needle and gauge valves are used to control and check the flow of liquid and gasses into the dedicate systems, thus a higher risk of suffering damages have occurred if subjected to extreme pressures.

SS 316H Gauge Vent Valves Exporters, 316H Stainless Steel Multiport Gauge Valves, SUS 316H Parker Needle Valve, Grade 316H SS Screwed End Needle Valve, Stainless Steel 316H Hydraulic Needle Valve Supplier in Mumbai, India.

Austenitic Stainless Steel 316H Needle / Gauge Valves, AISI 316H Needle and Gauge Valves, SS 316H Gauge Valve, SS 316H Integral Bonnet Needle Valve, SS 316H Autoclave Needle Valve, SS 316H Forged Body Gauge Valve, SS 316H Needle Valve

These valves are also utilized in heavy industrial equipment, even the flow needs to bring to a final halt. Mainly, these valves are utilized where a precise adjustment of the flow is considered essential, or where the small and controlled flow is required. These valves can readily be used as both off and on valves, along with use in a system for throttling working.

These types of fittings are used to control and decrease the flow of air in the leg of the pneumatic system, results in slowing down the actuator set. The basic function of both fittings are is flow restriction, even the main difference is needle valve controls the flow of gas or liquid, while the flow control valve only ensure the control in one direction only.

The Steel 316H Needle & Gauge Valves are bi-directional, while the flow is one-directional only. In the fittings, there is a fine thread stem allows the gradual adjustment of the quantity of controlled flow that passes through the valve. The controlled flow enters the input and output slots through the orifice, which is actually sized by the tapered stem and through the output port. The flow of fittings features a simple bypass feature that allows tending a rapid and free flow, out from the output port, by means of the inlet.

We conduct different types of testing on a manufactured range of valves for assured quality. Before a SS 316H Needle & Gauge Valves are chosen for systems, it is essential that customers assess the flow rate requirements of pneumatic systems.




Needle Valve, Gauge Valves


Needal Valves Sizes

1/8" TO 2" (3 mm to 50 mm) Max Pressure:pressure -150#, 300#,600#


Needle Valves Design:

Forged Body with Inline/Straight or Angle Pattern, Integral Bonnet Design


End Connection Gauge Valves :

½" NPT / G ½ / ½" BSPT



-20 to 650°F (-28 to 343°C)


Gauge Valves Maximum working pressure

Up to 6000 psig (413 bar)


Flow Pattern

Straight/ Angle


End Connections Needle Valves :

NPT, tube socket weld, pipe socket weld,

    SS 316H 1.4401 S31609 SUS 316H
    Grade C Mn Si P S Cr Mo Ni Fe
    SS 316H 0.10 max 2.0 max 0.75 max 0.045 max 0.030 max 16.00 - 18.00 2.00 - 3.00 10.00 - 14.00 68.89 min
    Density Melting Point Tensile Strength Yield Strength (0.2%Offset) Elongation
    8.0 g/cm3 1400 °C (2550 °F) Psi – 75000 , MPa – 515 Psi – 30000 , MPa – 205 35 %


Stainless Steel 304 Needle Valve – F x F
Needle Valve - F x F
Stainless Steel 304 Needle Valve – F x F – HP
Needle Valve – F x F – HP
Stainless Steel 304 Hex Needle Valve – F x F
Hex Needle Valve – F x F
Stainless Steel 304 Hex Needle Valve – M x F
Hex Needle Valve – M x F
Stainless Steel 304 Hex Needle Valve – Vent
Hex Needle Valve – Vent
Stainless Steel 304 Needle Valve – M x M
Needle Valve – M x M
Stainless Steel 304 Gauge Valve – Multiport
Gauge Valve – Multiport
Stainless Steel 304 Gauge Valve – Block & Bleed
Gauge Valve – Vent

Quality Assurance

Stainless Steel S31609 Needle & Gauge Valve are manufactured and controlled to international standards such as ASTM, ASME, BS, MSS, EN, DIN or WERKSTOFF. Our products undergo stringent quality tests before they are dispatched.

Material Testing

The material tests performed on Stainless Steel 316H Needle & Gauge Valve are PMI Testing, Ultrasonic Test, Mechanical Testing, Spectro Tests for Chemical Analysis of the grade, Flaring Test, IGC, etc. are some of the tests conducted at our facility. We welcome stage wise inspection from any of your representative or third party inspection agencies.

Popular Searches

stainless steel 316h needle & gauge valve standards, ss 316h screwed end needle valve stockists, ss 316h needle valve standards, ss 316h block & bleed gauge valves, stainless steel 316h needle valve distributors, stainless steel 316h gauge valve, ss 316h gauge/needle valve traders, 316h ss gauge valve, ss 316h bonnet needle valves size, stainless steel 316h forged body gauge valve types, stainless steel 316h 3 way needle valve dealers, 316h ss high pressure gauge valve size, stainless steel 316h gauge vent valves, ss 316h integral bonnet needle valve price, ss 316h parker needle valve india, stainless steel 316h autoclave needle valve manufacturer in mumbai, ss 316h gauge & needle valve stockholder, stainless steel 316h hydraulic needle valve, ss 316h gauge bleed needle valves, buy high quality austenitic stainless steel 316h needle and gauge valve, stainless steel multiport gauge valves grade 316h.